How to fix NETGEAR CM1150V when all LEDs stay on?
If all the LEDs stay on your NETGEAR Modem, try resetting the configuration of the modem to its factory defaults. If the problem continues after the reset, it might indicate a hardware issue.
What to do if all LEDs are off on my NETGEAR CM1150V?
If all the LEDs are off when your NETGEAR Modem is plugged in, ensure the power cord is securely connected to both the modem and a functioning power outlet. Also, verify you're using the 12 VDC, 2.5A power adapter from NETGEAR specifically designed for this product. If the issue continues, it might indicate a hardware problem.
Why is the Ethernet LED off on my NETGEAR Modem?
If the Ethernet LED is off for a port with an Ethernet connection on your NETGEAR Modem, first check that the Ethernet cable connections are secure at both the modem and the connected device (computer, router, or WiFi router). Also, ensure that the connected hub or computer is powered on and that you are using the correct cable.
Explains the status LEDs on the front panel of the cable modem.
Describes the physical connections and buttons on the rear panel of the modem.
Guides users through the process of setting up and activating the modem with their ISP.
Guides on restoring the modem to its original factory settings.
Helps diagnose issues using the modem's LED indicators and their behavior.
Steps to resolve problems with the cable modem's internet connectivity.
General| Type | Cable Modem |
|---|---|
| DOCSIS | 3.1 |
| DOCSIS Channels | 32x8 |
| Maximum Download Speed | 2 Gbps |
| Maximum Upload Speed | 2 Gbps |
| Voice Support | Yes |
| Voice Ports | 2 |
| IPv6 Support | Yes |
| Wireless | No |
| Compatibility | Compatible with major cable providers |
To Next Page
