11
ReadySHARE Access
After installation, you can insert a USB storage device into the USB
ports on the modem router
and share the contents with others on the
network. (If your USB device has special drivers, it is not compatible.)
If your USB device needs a power supply, you have to use it when
you connect the USB device to the USB port. It might take up to 2
minutes before the USB drive is ready for sharing after you connect it.
T
o access your USB device:
On Windows systems, use any of these methods:
• Sel
ect Start > Run and enter \\readyshare in the dialog box.
Click OK.
• Open
Explorer or Safari and enter \\readyshare in the address
bar.
• Open
My Network Places, and enter \\readyshare in the address
bar.
On Mac systems, do this:
1. Sel
ect Go > Connect to Server.
2. Enter smb://read
yshare as the server address.
3. Cl
ick Connect.
The readyshareconnect.exe file (fo
r Windows) is available to
download here: www.netgear.com/readyshare
To Next Page
Loading...
