Get Started with NETGEAR Genie
28
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2
To use WPS to join the wireless network:
If your wireless device supports WPS (Push 'N' Connect), follow these steps:
1. Press the WPS button on the wireless modem router top panel
.
2. Within two minutes, press the WPS button on your wireless device, or follow the WPS
instructions that came with the device.
The device is now connected to your wireless
modem router.
3. Repeat steps 1–2 to add other WPS wireless devices.
To Next Page
Loading...
