2-9
The wizard displays the screen below when it is ready to configure
your Digital Entertainer HD.
3. For some firewalls, specific ports must be opened so that the Digital
Entertainer HD can access media files on your computer. If prompted
by the firewall, click Allow or Unblock to allow the access. For
information about manually opening firewall ports, see “Firewall Port
Settings” on page 7-2.
4. Select whether or not you want to create photo thumbnails, and then
click Next
5. When you see a message confirming that the configuration is done,
go to your television.
You are finished with the installation and can play media on your Digital
Entertainer HD.
Figure 2-5
Note: Depending on the media files you have, the initial full
scan might take some time to complete.
To Next Page
Loading...
