6-7
• Auto load on power-up. If this option is on, the Digital Entertainer
HD will load the backup library following a power failure.
• Auto save after scan. Immediately after new files are scanned, the
backup library is updated to the version on the Digital Entertainer
HD.
• Daily auto-scan. Set the Digital Entertainer HD to scan your files
every day at the specified time, or you can disable this option.
• Show file details. This option is for use in detecting invalid files and
should be left off unless you are instructed to use it by NETGEAR
support personnel.
More... Settings
The following settings are available from the More main menu option:
• PC Access. To use this feature you must have a Windows-based PC
running the Digital Entertainer for Windows software. PC Access lets
you use the remote control and television to view and access features
on your PC such as browsing the Internet or checking email.
• Now playing. Display the audio and video media that is currently
playing.
• Follow me. To use this feature you must have more than one Digital
Entertainer HD installed. Selecting Follow me lets you direct the
media that is playing to another Digital Entertainer HD in a different
room. See also “Using Multiple Digital Entertainer HDs” on
page 3-7.
Warning: This option requires your computer to be on and
the shared files available at the specified time. If
your computer is in sleep, standby or any mode
other than on, the scan will find no shared files,
and your library will contain no media.
To avoid this, you can disable Daily auto-scan,
or leave the computer on, or enable the computer
Wake on LAN feature so your computer is
activated by the scan.
To Next Page
Loading...
