5-6
3. Select New to add an item to play, or select a command from the list.
4. Create a script. Examples are provided in the following section.
Video Script Example
To create a script to play a sequence of videos:
1. Select Play a prerecorded video, and then click Next.
2. Select Add to add one or more videos to play, and then click Next.
3. Specify where you want to play this video script.
4. Click Next.
5. Add additional commands, and then click Next.
6. Click Tag to add media information such as rating, genre, and a
description to this command sequence.
Tagging a Multi-part Video Example
To tag a multi-part video file and create a script to play it:
1. Use the Command Wizard to apply a single tag to several files. For
example, you could name video files nemo_part_1 and nemo_part_2.
2. Create a “.sjv” script to play all the files in order.
Figure 5-6
Note: Typically, leave this set to Current Room to play
the sequence in the Digital Entertainer HD that
you selected.
To Next Page
Loading...
