Configure the IPv4 LAN Settings
126
ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
9. Click the Apply button.
Your settings are saved. The modified VLAN profile displays in the VLAN Profiles table on
the LAN Setup screen.
Enable, Disable, or Delete Existing VLAN Profiles
The following procedure describes how to enable or disable existing VLAN profiles or remove
VLAN profiles that you no longer need.
To enable, disable, or remove one or more VLAN profiles:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Network Configuration > LAN Settings.
The LAN submenu tabs display, with the LAN Setup screen in view, displaying the IPv4
settings.
7. In the VLAN Profiles table, select the check box to the left of each VLAN profile that you
want to enable, disable, or remove or click the Select All button to select all profiles.
Note: You cannot select the default VLAN profile, that is, you cannot disable
or remove the default VLAN profile.
8. Click one of the following buttons:
• Enable. Enables the selected VLAN profiles.
The ! status icons change from gray circles to green circles, indicating that the
selected profiles are enabled. By default, when you add a profile to the table, the
profile is automatically enabled.
• Disable. Disables the selected VLAN profiles.
To Next Page
Loading...
