NETGEAR FVS336Gv3 - Configure Other Firewall Features

Customize Firewall Protection
267
ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
9. Enter the settings as described in the following table.
10. Click the Apply button.
Your settings are saved. The new rule is added to the Outbound Services table on the
DMZ WAN Rules screen.
Configure Other Firewall Features
The following sections provide information about other firewall features:
• Manage Protection Against Common Network Attacks
• Manage VPN Pass-Through
Setting Description
Service From the menu, select FTP.
Action From the menu, select ALLOW by schedule, otherwise block.
Select Schedule From the menu, select a schedule.
For information about how to configure schedules, see Define a Schedule on
page 294.
DMZ Users From the menu, select Address Range.
In the Start and Finish fields, specify the DMZ IPv6 address range for the users that
are allowed to access the FTP server.
WAN Users From the menu, select Single Address.
In the Start field, enter the WAN IPv6 address of the FTP server on the Internet.
Log You can leave the selection from the menu at Never.
QoS Priority From the menu, select Maximize-Throughput.
For more information about QoS priorities for IPv6 traffic, see Default Quality of
Service Priorities for IPv6 Firewall Rules on page 300.