Monitor System Access and Performance
596
ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Monitoring > Router Status > Tunnel Status.
The Tunnel Status screen displays.
Note: For information about configuring IPv6 tunnels, see Manage Tunneling
for IPv6 Traffic on page 101.
The IPv6 Tunnel Status table shows the following fields:
• Tunnel Name. The tunnel name for the 6to4 tunnel is always sit0-WAN1 (SIT stands
for Simple Internet Transition); the tunnel name for an ISATAP tunnel is isatapx-LAN,
in which x is an integer.
• IPv6 Address. The IPv6 address of the local tunnel endpoint.
View the VPN Connection Status, L2TP Users, and PPTP Users
The following sections provide information about viewing the status of IPSec VPN and SSL
VPN connections and PPTP and L2TP users:
• View the VPN Firewall IPSec VPN Connection Status and Terminate or Establish Tunnels
on page 366
• View the VPN Firewall SSL VPN Connection Status and Disconnect Active Users on
page 447
• View the Active PPTP Users and Disconnect Active Users on page 423
• View the Active L2TP Users and Disconnect Active Users on page 426
To Next Page
Loading...
