NETGEAR FVS336Gv3 - Manage Existing Firewall Rules

Customize Firewall Protection
252
ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
9. Make your selections from the menus and enter the settings.
For more information about the menus and settings, see Settings for Inbound Rules on
page 219.
The following table lists the menus that apply to an IPv6 LAN DMZ inbound rule.
10. Click the Apply button.
Your settings are saved. The new rule is added to the Inbound Services table on the LAN
DMZ Rules screen.
Manage Existing Firewall Rules
After you add an outbound or inbound firewall rule for IPv4 or IPv6 traffic, you can perform
the following actions with the rule:
• Change the rule
• Increase or lower the priority of the rule
• Disable the rule
• Enable the rule
Menus that apply to all IPv6 LAN DMZ inbound
rules
Menus that apply only when your selection from
the Action menu is not BLOCK always
Service Select Schedule
Note: This menu is available only when the selection
from the Action menu includes by schedule.
Action
LAN Users
DMZ Users
Log