Configure the IPv6 LAN Settings 
201
 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
9.  Click the Apply button.
Your settings are saved.
Add an IPv6 DMZ Address Pool
If you use a stateful DHCPv6 server for the DMZ, you must add local DHCP IPv6 address 
pools so that the DHCPv6 server can control the allocation of IPv6 addresses in the DMZ.
 To add an IPv6 DMZ address pool:
1.  On your computer, launch an Internet browser.
2.  In the address field of your browser, enter the IP address that was assigned to the VPN 
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3.  In the Username field, type your user name and in the Password / Passcode field, type 
your password.
For the default administrative account, the default user name is admin and the default 
password is password.
Domain Name Enter the domain name of the DHCP server.
Server Preference Enter the DHCP server preference value. The possible values are 0–255, with 
255 as the default setting.
This is an optional setting that specifies the server’s preference value in a 
server advertise message. The client selects the server with the highest 
preference value as the preferred server.
DNS Server From the DNS Server menu, select a DNS server option:
•  Use DNS Proxy. The VPN firewall acts as a proxy for all DNS requests 
and communicates with the ISP DNS servers that you configure. For 
information about specifying the ISP DNS servers, see 
Manually Configure 
a Static IPv6 Internet Connection on page  94.
•  Use DNS from ISP. The VPN firewall uses the ISP DNS servers that you 
configure. For information about specifying the ISP DNS servers, see 
Manually Configure a Static IPv6 Internet Connection on page  94.
•  Use below. When you select this option, the Primary DNS Server and 
Secondary DNS Server fields become available for you to enter IP 
addresses:
-  Primary DNS Server. Enter the IP address of the primary DNS server 
for the DMZ.
-  Secondary DNS Server. Enter the IP address of the secondary DNS 
server for the DMZ.
Lease/Rebind Time Enter the period after which the DHCP lease is renewed with the original DHCP 
server or rebound with another DHCP server to extend the existing DHCP 
lease. The default period is 86400  seconds (24 hours).
Setting Description