EasyManua.ls Logo

NETGEAR GA311 - Appendix A; Technical Specifications

NETGEAR GA311
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical Specifications A-1
Appendix A
Technical Specifications
This appendix provides technical specifications for the NETGEAR 10/100/1000 Mbps Gigabit
Ethernet Adapter GA311
.
Cable Specifications GA311 (10/100/1000BASE-T)
Port type: 10/100/1000BASE-T
Connector: RJ-45
Media: CAT 5 UTP/CAT 5e UTP
Maximum Distance: 325 feet (100 meters)
Note: 1000BASE-T signaling requires four twisted pairs of Category 5 balanced cabling, as
specified in ISO/IEC 11801:1995 and ANSI/EIA/TIA-568-A (1995) and tested for additional
performance using testing procedures defined in TIA/EIA TSB95.
Standards Compatibility IEEE 802.3ab 1000Base-T Gigabit Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u Auto Negotiation
IEEE 802.1Q VLAN
GA311Network Connection RJ-45 connector for Category 5 UTP cable
Full-duplex 2000 Mbps (1000 Mbps each way) Gigabit Ethernet
Host Connection 64 bit, 66/33 MHz PCI slot
32-bit, 33 MHz PCI slot
PCI rev 2.2 or higher
DC Operating Voltage +5V +/- 5%
Power Consumption 4.75 watts, maximum
Dimensions 5.53 x 2.30 in. (14.04 x 5.84 cm)
Weight 2.2 oz. (60 g)
Operating Temperature
0º to 55º C
Storage Temperature -10 degrees to 70 degrees
Operating Humidity 10% to 90% noncondensing
Agency Compliance FCC Class B, CE mark, VCCI, C-Tick
WOL Support Remote Walk-up

Table of Contents

Other manuals for NETGEAR GA311

Related product manuals