EasyManuals Logo

NETGEAR GS108Ev3 Installation Guide

NETGEAR GS108Ev3
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Installation Guide
On=Link
Blink=ACT
Both=1000M
100M 10M
8-Port Gigabit Ethernet Plus Switch
GS108Ev3
Package contents
• Switch
• Poweradapter(variesbyregion)
• Wall-mountkit
• Installationguide
GS108Ev3switch
Router
IPcamera
ReadyNAS
Gamingconsole
SmartTV
Internet
Laptop
WiFiaccesspoint
Desktop
1. Register the switch
1. FromacomputerormobiledevicethatisconnectedtotheInternet,visit
my.netgear.com.
2. LogintoyourNETGEARaccount.
Note: Ifyoudon’thaveafreeNETGEARaccount,youcancreateone.
TheMyProductspagedisplays.
3. Fromthemenuontheleft,selectRegisteraProduct.
4. IntheSerial Numbereld,typetheserialnumberofyourswitch.
Theserialnumberis13digitslong.Itisprintedontheswitchlabel.
5. FromtheDate of Purchasemenu,selectthedatethatyoupurchasedthe
switch.
6. ClicktheREGISTERbutton.
YourswitchisregisteredtoyourNETGEARaccount.
AconrmationemailissenttoyourNETGEARaccountemailaddress.
2. Connect the switch
Sample connections
Note: WerecommendthatyouuseaCategory5e(Cat5e)cableorhigher-rated
cableforGigabitEthernetconnections.
Thisswitchisdesignedforindooruseonly.Ifyouwanttoconnectittoadevice
locatedoutdoors,theoutdoordevicemustbeproperlygroundedandsurge
protected,andyoumustinstallanEthernetsurgeprotectorinlinebetweenthe
switchandtheoutdoordevice.Failuretodosocandamagetheswitch.
3. Check the LEDs
Whenyouconnectthepowercordtotheswitchandplugitintoanelectrical
outlet,theLEDsindicatethestatus:
LED Description
Power LED Solidgreen Theswitchispoweredonandoperatingnormally.
Off Powerisnotsuppliedtotheswitch.
Left port LED Right port LED Combined,theseRJ-45portLEDsindicatelink,
speed,andactivity.
Solidgreen Solidgreen Avalid1Gbpsportlinkisestablished.
Solidgreen Off Avalid100Mbpsportlinkisestablished.
Off Solidgreen Avalid10Mbpsportlinkisestablished.
Blinkinggreen Blinkinggreen Theportistransmittingorreceivingpacketsat
1Gbps.
Blinkinggreen Off Theportistransmittingorreceivingpacketsat
100Mbps.
Off Blinkinggreen Theportistransmittingorreceivingpacketsat
10Mbps.
Off Off Noportlinkisestablished.
Beforeconnectingthisswitchtooutdoorcablesordevices,see
https://kb.netgear.com/000057103forsafetyandwarrantyinformation.

Other manuals for NETGEAR GS108Ev3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR GS108Ev3 and is the answer not in the manual?

NETGEAR GS108Ev3 Specifications

General IconGeneral
ModelGS108Ev3
CategorySwitch
VLAN SupportYes
QoS SupportYes
Switching Capacity16 Gbps
Forwarding Rate11.9 Mpps
Energy Efficient Ethernet (EEE)Yes
Power over Ethernet (PoE)No
Fanless DesignYes
Humidity10% to 90% non-condensing
ManagementWeb-based management
Operating Temperature0° to 40° C (32° to 104° F)
Storage Temperature-20° to 70° C (-4° to 158° F)
Ports8 x 10/100/1000 Mbps Gigabit Ethernet
Power Supply12V, 1.0A external power adapter

Related product manuals