NETGEAR GS108LP User Manual

 Position system cables and power cables carefully. Route cables so that they cannot be stepped on
or tripped over. Be sure that nothing rests on any cables.
 Do not modify power cables or plugs. Consult a licensed electrician or your power company for site
modifications.
 Always follow your local and national wiring rules.

NETGEAR GS108LP Specifications

General

Switch type	Unmanaged
Quality of Service (QoS) support	Yes
Power connector	AC-in jack
Gigabit Ethernet (copper) ports quantity	8
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	-
Form factor	1U
Product color	Black, Grey
Number of fans	0 fan(s)
Total Power over Ethernet (PoE) budget	60 W
Power source	DC/PoE
Input current	1.25 A
DC input voltage	54 V
Power consumption (max)	130 W
Power consumption (typical)	67.5 W
MAC address table	4000 entries
Mean time between failures (MTBF)	2752476 h
10G support	No
Networking standards	IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Heat dissipation	230.85 BTU/h
Operating altitude	0 - 1000 m
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	0 - 90 %
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	102 mm
Width	236 mm
Height	27 mm
Weight	600 g