EasyManuals Logo

NETGEAR GS724T - ProSafe Switch User Manual

NETGEAR GS724T - ProSafe Switch
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
Page 19 of 20
APPENDIX C: TECHNICAL SPECIFICATIONS
This appendix provides technical specifications for the NETGEAR GS724T Gigabit Smart Switch.
Network Protocol and Standards Compatibility
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T
IEEE 802.3z 1000Base-X
IEEE 802.3x flow control
Management
IEEE 802.1Q Static VLAN (Up to 24 ranging from 2 to 4K)
Port-based VLAN (Up to 24)
IEEE 802.1p Class of Service (CoS)
Port-based QoS (options High/Normal/Low/ Lowest)
Port Trunking - Manual as per IEEE802.3ad Link Aggregation
IEEE 802.1D Spanning Tree Protocol
RFC 1157 SNMP v1
Interface
24 RJ-45 connectors for 10BASE-T, 100BASE-TX, and 1000BASE-T (Auto Uplink™ on all ports)
with 2 SFP GBIC module bays that share with 2 RJ-45 ports for fiber connectivity
LEDs
Per port (Gigabit): Link/Activity, Speed, FDX/HDX
Per device: Power
Performance Specifications
Forwarding modes: Store-and-forward
Bandwidth: 48 Gbps
Network latency: Less than 20 microseconds for 64-byte frames in store-and-forward mode for 100 Mbps to 100 Mbps transmission
Buffer memory: 256 KB embedded memory per unit
Address database size: 8,000 media access control (MAC) addresses per system
Mean Time Between Failure (MTBF): 115,221 hours (~ 13 years)
Power Supply
Power Consumption: 29 W maximum
100-240VAC/50-60 Hz universal input
Physical Specifications
Dimensions (H x W x D): 1.6 x 17.3 x 8.1 in. (43 x 440 x 205 mm)
Weight: 6.0 lbs. (2.7 kg)
Environmental Specifications
Operating temperature: 0 to 40°C (32 to 104°F)
Storage temperature: -20 to 70°C (-4 to 158°F)
Operating humidity: 90% maximum relative humidity, non-condensing
Storage humidity: 95% maximum relative humidity, non-condensing
Operating altitude: 3,000 m (10,000 ft) maximum
Storage altitude: 3,000 m (10,000 ft) maximum
Electromagnetic Emissions
CE mark, commercial
FCC Part 15 Class A
VCCI Class A
C-Tick
Electromagnetic Immunity
EN 55022 (CISPR 22), Class A
Safety
CE mark, commercial
UL listed (UL 1950) / cUL IEC950 / EN60950
CSA certified (CSA 22.2 #950)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR GS724T - ProSafe Switch and is the answer not in the manual?

NETGEAR GS724T - ProSafe Switch Specifications

General IconGeneral
ModelGS724T
Product LineProSafe
Form FactorRack-mountable
Switching Capacity48 Gbps
VLAN SupportYes
Power SupplyInternal
Device TypeSwitch
Power over Ethernet (PoE)No
MAC Address Table Size8K entries
Routing ProtocolStatic routing
Remote Management ProtocolHTTP, HTTPS
FeaturesVLAN, QoS, IGMP snooping, port mirroring
Compliant StandardsIEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
ManagementManaged
Weight3.6 kg

Related product manuals