EasyManuals Logo

NETGEAR GS724T - ProSafe Switch User Manual

NETGEAR GS724T - ProSafe Switch
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
Page 6 of 20
Features
The following list identifies the key features of the NETGEAR GS724T Gigabit Smart Switch.
Twenty-four 10/100/1000 Mbps auto-sensing Gigabit Ethernet switching ports
Two SFP GBIC combo Gigabit Ethernet slots for optional fiber connectivity
Automatic detection of SFP GBIC modules
Reset Button.
Factory Defaults Button.
Administrative switch management including:
IEEE 802.1Q Tag VLAN with up to 24 VIDs ranging in 2 to 4K
Port-based VLAN with up to 24 groups, any one port can belong to different VLAN groups
IEEE 802.1p QoS support, 4 priority queues per port
IEEE 802.3ad Link Aggregation support
Web-based management with embedded HTTP server provided
Supports port-setting function which allows user to enable/disable each port, set speed, duplex mode and device follow control
Support Auto-Discovery application program for discovering and managing the switches on the network
Support flash upgrading, configuration backup/restore and factory reset
IEEE 802.1D Spanning Tree Protocol
RFC 1157 SNMP v1
Full compatibility with IEEE standards:
IEEE 802.3i (10BASE-T)
IEEE 802.3u (100BASE-TX)
IEEE 802.3z/ab (1000BASE-X, 1000Base-T)
IEEE 802.3x (full-duplex flow control)
Auto-sensing and auto-negotiating capabilities for all ports
Auto Uplink™ on all ports to make the right connection
Integrated address Look-Up Engine, supports 8K absolute MAC addresses
Full- and half-duplex functions for all RJ-45 ports
Store-and-Forward transmission to remove bad packets from the network
Active flow control to minimize packet loss/frame drops:
Half-duplex back-pressure control
Full-duplex IEEE 802.3x pause frame flow control
LED indicators for port status monitoring:
Power LED to indicate power on/off status
Link LED to indicate link status and activity
Dual-color Mode LED to indicate speed, activity and duplex mode
Flexible installation:
Standalone desktop installation
19-inch standard rack-mount
Standard 1U case size

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR GS724T - ProSafe Switch and is the answer not in the manual?

NETGEAR GS724T - ProSafe Switch Specifications

General IconGeneral
ModelGS724T
Product LineProSafe
Form FactorRack-mountable
Switching Capacity48 Gbps
VLAN SupportYes
Power SupplyInternal
Device TypeSwitch
Power over Ethernet (PoE)No
MAC Address Table Size8K entries
Routing ProtocolStatic routing
Remote Management ProtocolHTTP, HTTPS
FeaturesVLAN, QoS, IGMP snooping, port mirroring
Compliant StandardsIEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
ManagementManaged
Weight3.6 kg

Related product manuals