GS748T Software User Manual
4-4 Configuring the Switch
v2.0, April 2007
• Rx Error: Received packet/s with error. Packets are counted as contributing to RX Error if
they:
• Were less than 64 bytes or greater than 1522 bytes in size
• Had a bad FCS
• Were dropped due to lack of resources.
1. Click on Statistics in the main menu; a Statistics page appears.
2. Click on the Refresh button at the top of the page to obtain current statistics data
3. Click Clear Counters to start a new statistics count over time.
4. Click on a port ID entry; the individual statistics table for the port is displayed. This table
breaks down statistics in more detail as shown in the following diagram.
Figure 4-8
To Next Page
Loading...
