NETGEAR GS750E

Your settings are saved and the Storm Control Rate table displays.
8.
Set the storm control rate by doing the following:
a. Select one or more ports.
b. In the Storm Control Rate menu, select the maximum rate.
You can set a rate from 512 Kbit/s to 512 Mbit/s. By default, no limit is set.
c. Click the Apply button.
Your settings are saved.
9.
To set a different rate for one or more other ports, repeat Step 8.
User Manual37Optimize Performance With
Quality of Service
48-Port Gigabit Ethernet Plus Switch with 2 SFP Ports Model GS750E