Why is file transfer slow on my NETGEAR Switch?
Slow file transfers on your NETGEAR Switch might be due to a broadcast storm caused by a network loop (redundant path). To fix this, ensure only one path exists between any two networked devices to break the loop. You can also configure loop prevention in the switch's web management interface.
What to do if combined speed and activity LED is blinking continuously on all connected ports and the network is disabled on NETGEAR Switch?
If the combined speed and activity LED is blinking continuously on all connected ports and the network is disabled on your NETGEAR switch, it indicates a network loop (redundant path) has been created. Resolve this by ensuring only one path exists between any networked device. You can also configure loop prevention through the switch's web management interface.
What to do if a segment or device is not recognized as part of the network on NETGEAR Switch?
If a segment or device isn't being recognized on your NETGEAR Switch network, it could be due to improper connection or cabling that doesn't meet Ethernet standards. Check that all cabling is correct and connectors are securely positioned in the ports. Ensure no equipment has been accidentally disconnected.
What to do if combined speed and activity LED is off when the port is connected to a device on NETGEAR Switch?
If the combined speed and activity LED is off when a port is connected to a device on your NETGEAR Switch, it suggests a port connection issue. Check the crimp on the connectors and ensure the plug is properly inserted and locked into the port on both the switch and the connected device. Verify that all cables are correctly used and meet Ethernet specifications. Test for defective ports, cables, or modules in a known working environment.
How to fix NETGEAR Switch when power LED is off?
If the power LED on your NETGEAR Switch is off, the switch isn't receiving power. Check the power cable connections at both the switch and the power source. Ensure all cables are correctly used and comply with Ethernet specifications.
General| Switch type | Unmanaged |
|---|---|
| Stackable | - |
| Certification | VCCI Class A |
| Product color | Gray |
| Rack mounting | Yes |
| Housing material | Metal |
| SFP module slots quantity | 2 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Basic switching RJ-45 Ethernet ports quantity | 48 |
| Number of VLANs | 64 |
| Networking standards | IEEE 802.1Q, IEEE 802.1p, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3i, IEEE 802.3u, IEEE 802.3z |
| Virtual LAN features | Tagged VLAN |
| DHCP features | DHCP client |
| Jumbo frames | 9000 |
| Forwarding rate | 74.4 Mpps |
| Latency (1 Gbps) | 4 µs |
| MAC address table | 16000 entries |
| Packet buffer memory | 1.5 MB |
| Mean time between failures (MTBF) | 1031177 h |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 30 W |
| Heat dissipation | 102.7 BTU/h |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
Weight and Dimensions| Depth | 204 mm |
|---|---|
| Width | 440 mm |
| Height | 43 mm |
| Weight | 3250 g |
To Next Page
