NETGEAR GSM7328S-200NAS - Switch Features

Page 7 of 24
Features
The following list identifies the key features of the NETGEAR Model GSM7328S ProSafe 24+4 Gigabit
Ethernet L3 Managed Stackable Switch.
• Twenty-four 10/100/1000 Mbps auto sensing Gigabit Ethernet TP ports
• Four SFP module combo ports for a variety of fiber connections
• Four I/O module bays can be used with the AX742 24 Gigabit Stacking Module to allow up to 8
switches to form a stack with single management IP address, or with the AX741 10 Gigabit Ethernet
XFP Adapter to allow 10Gbps XFP pluggable optics to be utilized
• Full compatibility with IEEE standards:
o IEEE 802.3i, (10BASE-T)
o IEEE 802.3u (100BASE-TX)
o IEEE 802.3ab (1000BASE-T)
o IEEE 802.3z (1000BASE-X)
o IEEE 802.3ae (10000BASE-LR)
o IEEE 802.3ae (10000BASE-SR)
o IEEE 802.3x (full-duplex flow control)
• Full Layer 2 switch management including:
o SNMP v1,v2c, v3
o RMON (groups 1,2,3 and 9)
o IEEE 802.1Q (up to 512 Static VLAN groups)
o IEEE 802.1D (Spanning Tree)
o IEEE 802.1w (Rapid Spanning Tree)
o IEEE 802.1s (Multiple Spanning Trees)
o IEEE802.3ad Link Aggregation (LACP)
o Port Mirroring
o DHCP/Bootp Client for automatic IP address set up
o DHCP server to assign IP address to attached client device
o Configuration file export/import
o TFTP firmware upgrade
• Layer 3 switch management including:
o RIP I, II
o OSPF v2
o Static IP Routing
o VLAN Routing
o Virtual Router Redundancy Protocol (VRRP)
• Security to better safeguard your network
o Password Access Control
o IP Access Control List
o MAC Access Control List
o RADIUS Client Support
o Port Access Control (IEEE 802.1x)
o SNMPv3
o Secure Socket Layer (SSLv3)
o Transport Layer Security (TLSv1)