NETGEAR JGS524E - User Manual

ProSafe Plus 24-Port Gigabit Switch JGS524E
Step 2. Connect power Step 3. Check status
On
Off
Power LED
Installation Guide
Activity (blinking)
No link (off)
Link
Port Link/ACT LEDs
1000 Mbps
100 Mbps
Port Speed LEDs
10 Mbps (off)
Step 1. Connect equipment
Optional
modem
JGS524E
Optional router
Computer Server
Internet
IG.fm Page 1 Thursday, September 20, 2012 9:21 AM

NETGEAR JGS524E Specifications

General

Model	JGS524E
Category	Switch
Form Factor	Rackmount
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
MAC Address Table Size	8K
VLAN Support	Yes
QoS	Yes
PoE	No
Humidity	10% to 90% non-condensing
Management	Web-based management
Operating Temperature	0°C to 40°C
Storage Temperature	–20°C to 70°C
Certifications	CE, FCC
Ports	24 x 10/100/1000BASE-T
Jumbo Frame Support	Yes, up to 9KB

Summary

Connect Equipment

Connect Power

Check Device Status

Power LED Status

Explains the meaning of the Power LED indicator on the switch.

Port Link;Activity LED Status

Describes the Link/Activity LEDs for network ports, indicating connection and data transfer.

Port Speed LED Status

Details the indicators for port connection speeds (1000/100/10 Mbps) on the switch.

Configure Switch Utility

Install Configuration Utility

Guides through the process of installing the switch management software on a computer.

Use Configuration Utility

Outlines how to access and configure the switch using the installed utility software.

Product Specifications

Technical Support Information