12
MA101 Default Wireless Configuration Settings
If this is a new wireless network installation, use the factory default settings to set
up the network and verify wireless connectivity. If this is an addition to an
existing wireless network, you will need to identify the wireless configuration and
security parameters already defined.
On Windows XP computers, your MA101 802.11b Wireless USB Adapter does
not use factory default settings. On computers with other versions of Windows,
your MA101 factory default basic settings are as follows:
• Wireless Network Name (SSID): Wireless
Note: In order for the MA101 USB Adapter to communicate with a wireless
access point, a wireless adapter, or other 802.11b wireless devices, all devices
must be configured with the same SSID which is also know as the wireless
network name.
• Mode (Infrastructure or Ad-Hoc): Infrastructure
• WEP Encryption: Off
To Next Page
Loading...
Need help?
General
