16
Configure your wireless
network connection.
a. Click on the “Allow me to
connect to the selected
wireless network even
though this is not secure”
check box.
b. Click Connect. The
connection status popup
message appears.
Note: This procedure assumes
you are connecting to a
wireless network which is not
using WEP security. If your
network includes WEP
settings, click the Advanced
button and configure the
MA101 accordingly. For help
with these steps, click the
“Learn about...” link on the
Windows XP Local Area
Connection Wireless Networks
Properties tab page.
Windows XP Wireless Network Connection
Configuration Utility
Windows XP Wireless Network Connection
Popup Message
Verify wireless connectivity to your network.
Verify connectivity by accessing the Internet or network resources.
Note: If you cannot connect, please see the “Troubleshooting Tips” on
page 27. If you have problems with accessing network resources, the
Windows Client and File and Print Sharing software might not be
installed and configured properly on your computers. Please refer to
“Preparing Your PCs for Network Access” on page 41.
To Next Page
Loading...
Need help?
General
