19
Configure your wireless
adapter.
a. The MA101 default settings
are as follows:
•SSID: Wireless
• Mode (Infrastructure or
Ad-Hoc): Infrastructure
• WEP encryption not
enabled.
b. Double click on the System
Tray icon to run the wireless
LAN configuration utility
you just installed to verify
your settings.
Note: You will not get a
connection unless your
settings match those of the
wireless network. If your
wireless network settings
are different from the
Netgear.
MA101Configuration Utility
Verify wireless connectivity to your network.
Note: If you cannot connect, please see the “Troubleshooting Tips” on
page 27. If you have problems with accessing network resources, the
Windows Client and File and Print Sharing software might not be
installed and configured properly on your computers. Please refer to
“Preparing Your PCs for Network Access” on page 41.
To Next Page
Loading...
Need help?
General
