21
Connect the MA101 to your
computer using the included
USB cable.
a. Lift the antenna on the
MA101.
b. Locate an available USB
port on the back of your
computer.
c. Connect the USB cable from
your computer to the
MA101.
d. The Windows Found New
Hardware Wizard dialog
box displays. Click Next,
and Next again at the search
for the best driver screen.
e. If the Digital Signature Not
Found warning appears,
click Ye s to continue.
Netgear tested the MA101
for Windows 2000
compatibility. If asked,
insert the Windows 2000
CD and follow the prompts.
f. Click Finish to close the
wizard. Click Yes to reboot
the system. You should now
see the Windows system
tray icon in the Windows
task bar.
Netgear MA101
Windows Found New Hardware Wizard
MA101 Configuration Utility SysTray Icon
To Next Page
Loading...
