NETGEAR NIGHTHAWK CM2000 User Manual

1. Turn off and disconnect existing modems and routers.
If you are replacing a modem that is currently connected in your home,
unplug the modem and plug the new cable modem into the same outlet.
2. Connect a coaxial cable.
Use a coaxial cable to connect the cable port on the cable modem to a cable
wall outlet.
Make sure that the cable is tightly connected. We recommend
that you connect your cable modem directly to a cable wall outlet.
If you must share the connection, use a 3.5dB (1 to 2) splitter.
3. Connect the power adapter.
Connect the power adapter to the cable modem and plug the power adapter
into an electrical outlet.
The cable modem might reset multiple times when it is powered on.
Power
adapter
Coaxial
cable
Start here

NETGEAR NIGHTHAWK CM2000 Specifications

General

Cables included	AC, LAN (RJ-45)
Quick start guide	Yes
WAN connection	Ethernet (RJ-45)
Ethernet LAN (RJ-45) ports	1
Product color	Black
DC input voltage	12 V

Weight and Dimensions

Depth	172 mm
Width	94 mm
Height	208 mm
Weight	482 g