NETGEAR NIGHTHAWK CM2000 User Manual

4. Wait for the Online LED to light solid white.
This process might take up to 10 minutes. When the cable modem comes
online, the Online LED
stops blinking and lights solid white.
After 10 minutes, if the Online LED doesn’t light solid, make sure that the
cable outlet is working or call your Internet service provider (ISP) to make sure
you have service.
Note: When the Online LED lights solid, your cable modem is not connected
to the Internet yet. You must connect a router or computer to your cable
modem and then activate your cable modem with your cable Internet
provider.
5. Connect a router to your cable modem..
a. Connect the Ethernet port on the cable modem to the WAN or Internet
port on the router
b. Power on the router.
c. Connect your computer or mobile device to the router.
6. Collect the following information:
• Your cable Internet provider (ISP) account information
• Cable modem model number, which is CM2000
• Cable modem serial number
• Cable modem MAC address
90° 90°

NETGEAR NIGHTHAWK CM2000 Specifications

General

Cables included	AC, LAN (RJ-45)
Quick start guide	Yes
WAN connection	Ethernet (RJ-45)
Ethernet LAN (RJ-45) ports	1
Product color	Black
DC input voltage	12 V

Weight and Dimensions

Depth	172 mm
Width	94 mm
Height	208 mm
Weight	482 g