Specify the cable connection starting
frequency
The starting frequency is automatically generated. For most Internet connections, you
do not need to specify this information. If you must enter a starting frequency, contact
your Internet provider.
To change the starting frequency:
1.
Launch a web browser from a computer that is connected to your cable modem.
2.
Enter http://192.168.100.1.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The default password is printed on the product label. The
user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Cable Connection.
The Cable Connection page displays the status of all downstream and upstream
channels.
5.
In the Starting Frequency field, type a number as instructed by your cable Internet
provider.
6. Click the Apply button.
Your settings are saved.
Ethernet Port Aggregation
Ethernet aggregation lets you use the LAN 1 and 2 ports on your cable modem to
improve the aggregated transfer speed. Note that Ethernet port aggregation is also
referred to as link aggregation, teaming port, and port trunking. If a router or computer
supports Ethernet aggregation, you can connect your router or computer to the LAN 1
and 2 ports on your cable modem.
User Manual17Manage Your Network
Nighthawk CM3000 2.5 Gbps Cable Modem
To Next Page
Loading...
Need help?
General
