NETGEAR Nighthawk CM3000 User Manual

device to your cable modem. Use two Ethernet cables to connect these ports to the
aggregated ports on a target network device.
•
Coaxial cable port. Connect the cable port to a cable wall outlet.
•
DC power connector. Connect the power adapter that came in the product package
to the DC power connector.
Label
The cable modem label shows the login information, MAC address, and serial number.
Figure 3. Cable modem label
System Requirements
You need the following to install your cable modem:
•
Compatible operating system:
- Windows 10
- Windows 8
- Windows 7
- Windows Vista
- Windows XP
- Windows 2000
- Mac OS
- Other operating systems running a TCP/IP network
User Manual8Hardware Setup
Nighthawk CM3000 2.5 Gbps Cable Modem

NETGEAR Nighthawk CM3000 Specifications

General

Brand	NETGEAR
Model	Nighthawk CM3000
Category	Modem
Language	English