NETGEAR Nighthawk EX7000 User Manual

Get Started
16
AC1900 WiFi Range Extender
If your existing WiFi network is hidden, select the Manually input my wireless SSID
radio button and type your WiFi network name.
7. When prompted, enter the password to connect to your WiFi network and click the NEXT
button.
The extender connects to your existing router’s WiFi network.
8. Complete the fields to name your extended networks and click the NEXT button.
The extender applies your settings. This means that its WiFi network names and WiFi
passwords change to the ones that you entered.
To make this change, the extender must
disconnect the computer or WiFi device that you are using from its WiFi network.
The following screen displays:
9. Use a WiFi network manager on the computer or WiFi device to connect to the new
extended WiFi network, and click the Continue button.

NETGEAR Nighthawk EX7000 Specifications

General

WiFi Technology	802.11ac
Number of Ethernet Ports	5
USB Ports	1 x USB 3.0
Antenna	3 external antennas
Processor	Dual-core 1GHz
WiFi Performance	AC1900
WiFi Band	2.4GHz and 5GHz
Ethernet Port Configuration	10/100/1000Mbps Gigabit Ethernet
Security	WPA/WPA2-PSK