NETGEAR Nighthawk EX7000 User Manual

Extender Network Settings
30
AC1900 WiFi Range Extender
5. Select Settings > WiFi.
6. Clear the Broadcast the Network name (SSID) check box.
7. Click the SA
VE button.
Your settings are saved.
Disable or Enable the WiFi Radios
By default, the extender’s WiFi radios broadcast signals in the 2.4 GHz and 5 GHz bands. If
you disable the WiFi radios, then no one can connect with WiFi to the extender.
 To disable or enable the WiFi radios:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser
.
2. In the address field of your browser
, enter www.mywifiext.net.
3. When prompted, enter your email address and password.
4. Click the Menu icon
.
The extender menu displays.

NETGEAR Nighthawk EX7000 Specifications

General

WiFi Technology	802.11ac
Number of Ethernet Ports	5
USB Ports	1 x USB 3.0
Antenna	3 external antennas
Processor	Dual-core 1GHz
WiFi Performance	AC1900
WiFi Band	2.4GHz and 5GHz
Ethernet Port Configuration	10/100/1000Mbps Gigabit Ethernet
Security	WPA/WPA2-PSK