Maintain and Monitor the Extender
43
AC1900 WiFi Range Extender
Back Up and Manage the Extender Configuration
When the extender works correctly after initial setup, NETGEAR recommends that you back
up the extender configuration settings. After you have back up the settings, if you change the
extender configuration settings but are not content with the new settings, you can restore the
extender configuration to the backed-up settings.
Back Up the Configuration Settings
You can back up the configuration file of the extender.
To back up the extender configuration settings:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser
.
2. In the address field of your browser
, enter www.mywifiext.net.
3. When prompted, enter your email address and password.
4. Click the Menu icon
.
The extender menu displays.
5. Select Settings > Other Settings.
6. Click the Backup button.
Your browser extracts the configuration file from the extender. By default, the name of the
backup file is NETGEAR_Ex7000.cfg.
7. If your browser is not set up to save downloaded files automatically
, locate where you want
to save the file.
Restore the Configuration Settings
You can restore the configuration file of the extender to a previously saved configuration file.
To restore the extender configuration settings:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser
.
2. In the address field of your browser
, enter www.mywifiext.net.
To Next Page
Loading...
Need help?
General
