Get Started
19
AC1900 WiFi Range Extender
3. Use an Ethernet cable to connect your router to the Ethernet port on the extender.
Ethernet
Extender Ethernet LAN port
WiFi router
4. Turn on your extender.
Plug the extender into an electrical outlet. Press the Power button if necessary
.
The NETGEAR LED lights white and the Link Rate LEDs and the Device to Extender LED
light amber and then turn of
f.
5. Use a WiFi network manager on a computer or WiFi device to find and connect to the
NETGEAR_EXT (SSID) WiFi network.
After the connection with the computer or WiFi device is established, the Device to
Extender LED lights solid green.
Note: In access point mode, you can connect your computer or WiFi device
to the extender only using a WiFi connection.
6. Launch a web browser
.
7. Enter www
.mywifiext.net in the address field of the browser.
The first time that you log in to the extender, the Create Account screen displays.
To Next Page
Loading...
Need help?
General
