NETGEAR Nighthawk EX7000 User Manual

FAQs and Troubleshooting
73
AC1900 WiFi Range Extender
If you use Smart Setup, and the extender does not connect to the WiFi router, does not
connect to the Internet, or cannot get an IP address from the WiFi router, Smart Setup
displays a message to notify you that the extender is not configured.
To run Smart Setup again, click the YES button. To manually configure the extender, click the
NO, CONFIGURE MANUALLY button.

NETGEAR Nighthawk EX7000 Specifications

General

WiFi Technology	802.11ac
Number of Ethernet Ports	5
USB Ports	1 x USB 3.0
Antenna	3 external antennas
Processor	Dual-core 1GHz
WiFi Performance	AC1900
WiFi Band	2.4GHz and 5GHz
Ethernet Port Configuration	10/100/1000Mbps Gigabit Ethernet
Security	WPA/WPA2-PSK