EasyManuals Logo

NETGEAR Nighthawk R6700 Installation

NETGEAR Nighthawk R6700
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
15
• If you are not sure, click the Speedtest button.
Speedtest verifies the upstream speed of your Internet
connection. The Uplink bandwidth Maximum field
displays the result of the test.
7. Click the Apply button.
The router assigns a high priority to Internet trac from your
gaming devices to the Internet.
Share a USB Drive on the Network
ReadySHARE lets you access and share a USB drive connected to
the router USB port. (If your USB drive has special drivers, it is not
compatible.)
¾ To access the USB drive from a Windows computer:
1. Insert your USB storage drive into the blue USB 3.0 port on the
front of the router.
If your USB drive has a power supply, you must use it when you
connect the USB drive to the router.
When you connect the USB drive to the router USB port, it
might take up to two minutes before it is ready for sharing. By
default, the USB drive is available to all computers on your local
area network (LAN).

Other manuals for NETGEAR Nighthawk R6700

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR Nighthawk R6700 and is the answer not in the manual?

NETGEAR Nighthawk R6700 Specifications

General IconGeneral
WiFi SpeedAC1750 (450 + 1300 Mbps)
USB Ports1 x USB 3.0
Antenna3 external antennas
BeamformingYes
Wireless Standard802.11a/b/g/n/ac
Operating Temperature32°F to 104°F (0°C to 40°C)
WiFi Technology802.11ac
Ethernet Ports4 x Gigabit Ethernet
Frequency Band2.4 GHz and 5 GHz
Memory128 MB Flash, 256 MB RAM
SecurityWPA2-PSK
Dimensions11.22 x 7.26 x 1.97 inches
Storage Temperature-4°F to 158°F (-20°C to 70°C)
Processor1GHz Dual Core Processor

Related product manuals