NETGEAR Nighthawk R6700 Installation

3
3. Prepare your modem.
a. Unplug your modem’s power.
b. If the modem has a battery backup, remove its batteries.
c. If your modem was already connected to another router,
disconnect the cable between your modem and that router.
Make sure that your modem is turned o and is cabled only to
the wall jack for your Internet service.
4. Connect your modem.
a. Plug in, then turn on your modem.
b. If you removed the batteries, replace them.
c. With the yellow Ethernet cable that came with the router,
connect your modem to the yellow Internet port on your
router.
Router
Ethernet cable
Modem
Internet
DSL or
cable
Internet
Modem
DSL or
cable

NETGEAR Nighthawk R6700 Specifications

General

WiFi Speed	AC1750 (450 + 1300 Mbps)
USB Ports	1 x USB 3.0
Antenna	3 external antennas
Beamforming	Yes
Wireless Standard	802.11a/b/g/n/ac
Operating Temperature	32°F to 104°F (0°C to 40°C)
WiFi Technology	802.11ac
Ethernet Ports	4 x Gigabit Ethernet
Frequency Band	2.4 GHz and 5 GHz
Memory	128 MB Flash, 256 MB RAM
Security	WPA2-PSK
Dimensions	11.22 x 7.26 x 1.97 inches
Storage Temperature	-4°F to 158°F (-20°C to 70°C)
Processor	1GHz Dual Core Processor