NETGEAR Nighthawk R6700 Installation

4
5. Add power to the router.
a. Connect the power adapter to the router and plug the
power adapter into an outlet.
b. Wait for the Power LED
on the front panel to light
amber and turn white.
If no LEDs are lit, press the Power On/O button on the
rear panel of the router.
6. Connect a computer.
You can use an Ethernet cable or connect with WiFi:
• For a wired connection, use an Ethernet cable (not included)
to connect your computer to a black Ethernet port on your
router.
• To connect with WiFi, use the WiFi settings on the product
label.
Power
adapter
Internet
Internet
DSL or
cable
Modem
Router
DSL or
cable
Modem
Router
Ethernet
cable
Ethernet
cable
Ethernet
cable
Power
adapter

NETGEAR Nighthawk R6700 Specifications

General

WiFi Speed	AC1750 (450 + 1300 Mbps)
USB Ports	1 x USB 3.0
Antenna	3 external antennas
Beamforming	Yes
Wireless Standard	802.11a/b/g/n/ac
Operating Temperature	32°F to 104°F (0°C to 40°C)
WiFi Technology	802.11ac
Ethernet Ports	4 x Gigabit Ethernet
Frequency Band	2.4 GHz and 5 GHz
Memory	128 MB Flash, 256 MB RAM
Security	WPA2-PSK
Dimensions	11.22 x 7.26 x 1.97 inches
Storage Temperature	-4°F to 158°F (-20°C to 70°C)
Processor	1GHz Dual Core Processor