NETGEAR Nighthawk X4S

Your router must use a direct Internet connection. It cannot connect to a different router to access the Internet.
3. Connect a storage device to the router.
4. If your USB device uses a power supply, connect it.
You must use the power supply when you connect the USB device to the router.
When you connect the USB device to the router USB port, it might take up to two minutes before it is ready for
sharing. By default, the USB device is available to all computers on your local area network (LAN).
5. Set up FTP access in the router.
See Set Up FTP Access Through the Internet on page 123.
6. On a remote computer with Internet access, you can use FTP to access your router using
ftp://yourname.mynetgear.com.
Set Up a New Dynamic DNS Account
To set up Dynamic DNS and register for a free NETGEAR account:
1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin.The default password is password.The user name and password are case-sensitive.
The BASIC Home page displays.
Use Dynamic DNS to Access USB Storage Devices Through the Internet
125
Nighthawk X4S AC2600 Smart WiFi Router