If you clear this check box, the next time a new WiFi client uses WPS to connect to the router, the router WiFi
settings change to an automatically generated random SSID and security key.
7. Click the Apply button.
Your changes are saved.
Use the Router as a WiFi Access Point
You can set up the router to run as an access point (AP) on the same local network as another router.
To set up the router as an AP:
1. Use an Ethernet cable to connect the Internet port of this router to a LAN port in the other router.
2. Launch a web browser from a computer or WiFi device that is connected to the network.
3. Type http://www.routerlogin.net.
A login window opens.
4. Enter the router user name and password.
The user name is admin.The default password is password.The user name and password are case-sensitive.
The BASIC Home page displays.
Network Settings
79
Nighthawk X4S AC2600 Smart WiFi Router
To Next Page
Loading...
