3. Reset button
4. Sync button
Orbi satellite LED behavior
The following table describes the LED behavior for an Orbi satellite LED that is on the
front of the satellite.
Table 2. Orbi satellite LED behavior
DescriptionLED color
The power adapter was connected to the satellite and the satellite is booting, the satellite
is attempting to sync with the router, or the Reset button was pressed and the satellite is
resetting to its factory default settings.
Pulsing white
The satellite finished booting, is synced with the router, and is working normally. This
color stays on all the time if the satellite is working normally.
Solid blue
The connection between the satellite and router is poor, or the satellite failed to sync with
the router. Move your satellite closer to the router (or closer to your other satellite if you
own more than one satellite)
Solid amber
The satellite's firmware is corrupted.Pulsing red
Connect your router
Power on your router and connect it to a modem.
User Manual11Overview
Orbi Whole Home AC1200 Mesh WiFi System
To Next Page
Loading...
Need help?
General
