Table 5. Factory default settings for the satellite (Continued)
Default SettingFeature
EnabledWiFi communicationWiFi
See satellite labelSSID name
WPA2-PSK (AES)Security
EnabledBroadcast SSID
Auto
2
Transmission speed
United States of America;
otherwise, varies by region
Country/region
2.4 GHz front and back haul: Auto
5 GHz back haul and front haul:
•
Channel 157 for NA, PR, AU, CA,
and TW
•
Channel 108 for EU, KO, and IN
RF channel
2
Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and
network overhead, lower actual data throughput rate.
Technical Specifications
The following are the technical specifications for your Orbi router and satellite
Technical Specifications for Orbi Router Model RBR10
The following table shows the technical specifications for the router.
Table 6. Technical specifications for the router
DescriptionFeature
TCP/IP, RIP-1, RIP-2, DHCP, PPPoE, PPTP, Bigpond, Dynamic
DNS, UPnP, and SMB
Data and routing protocols
North America: 120V, 60 Hz, input
UK, Australia: 240V, 50 Hz, input
Europe: 230V, 50 Hz, input
All regions (output): 12V, 1A DC output
Power adapter
User Manual139Supplemental Information
Orbi Whole Home AC1200 Mesh WiFi System
To Next Page
Loading...
Need help?
General
