NETGEAR Orbi RBR10 - Page 13

The satellite LED lights one of the following colors:
•
Blue. The Orbi router and satellite successfully synced, and the connection
between the router and satellite is good.
•
Amber. The Orbi router and satellite failed to sync, or the connection with the
router is poor. Move the Orbi satellite closer to the Orbi router and try again.
3.
If the satellite LED is amber, do the following:
a. Unplug your Orbi satellite, move the satellite closer to the router, and plug it
back in.
b.
Press the Sync button on the back of the router.
c.
Within two minutes, press the Sync button on the back of the satellite.
The satellite attempts to sync to the Orbi router. The satellite LED lights blue or
amber as described in Step 2 of this procedure.
4.
If you own more than one satellite, repeat these steps to sync your other satellite.
User Manual13Overview
Orbi Whole Home AC1200 Mesh WiFi System