NETGEAR PowerLINE 1000 Series User Manual

2
PowerLINE Networks
This chapter describes the setup and configuration of PowerLINE networks.
The chapter contains the following sections:
• How the PowerLINE Adapter Fits Into Your Network
• Set Up a New PowerLINE Network
• Connect to the PowerLINE Access Point
• Use WPS to Connect to Your Network (PLW Models)
• Customize Your Network Settings (PLW Models)
• Add an Adapter to an Existing PowerLINE Network
• About PowerLINE Network Security
• Use the Button to Set the Encryption Key
16

NETGEAR PowerLINE 1000 Series Specifications

General

Data Transfer Rate	Up to 1000 Mbps
Encryption	128-bit AES
Standard	HomePlug AV2
Pick-a-Plug LED	Yes
Operating Humidity	10% to 90% non-condensing
Ports	Gigabit Ethernet
Operating Temperature	0°C to 40°C