Need help?Do you have a question about the NETGEAR PTV3000 and is the answer not in the manual?
General| Category | Adapter |
|---|---|
| Model | PTV3000 |
| Type | Wireless Display Adapter |
| Wireless Technology | Wi-Fi |
| Wireless Standard | 802.11n |
| Video Resolution | Up to 1080p |
| Interface | HDMI |
| Power Supply | 5V DC |
| WiFi Frequency | 2.4 GHz |
| Encryption | WPA2 |
| Plug Type | US |
| Operating Temperature | 0° to 40° C (32° to 104° F) |
| Storage Temperature | -20°C to 70°C |
| Humidity | 90% max |
Lists necessary components for wireless display setup.
Step-by-step guide for connecting the adapter to the TV.
Instructions for updating the adapter's firmware.
Overview of connecting using Intel WiDi or Miracast.
Steps to launch Intel WiDi software on a laptop.
Procedure to establish a wireless connection to the TV.
Instructions for establishing a wireless connection via Miracast.
Adjust behavior and adapter settings for Intel WiDi.
Set laptop display to 1080p resolution for the TV.
Steps to update the Push2TV adapter firmware.
Troubleshoot blank TV screens after connection.
Fix choppy, frozen, or delayed video playback.
Resolving problems that occur during the initial setup.
Resolve issues where the adapter is not recognized.
Configure firewall to allow WiDi connection.
Steps to restore the adapter to its original settings.
To Next Page