Maintenance and Troubleshooting
34
Push2TV Wireless Display Adapter PTV3000
Change the Display Language
CAUTION:
Pressing the Reset button for more than 5 seconds erases the Push2TV
adapter setup and causes the Push2TV adapter to return to factory default
settings (see Return the Push2TV Adapter to Factory Default Settings on
page 45).
To change the adapter’s language display:
1. While the Push2TV adapter is turned on and connected to your TV
, use a paperclip to
press the Reset button less than 1 second.
Reset button
The language display on the TV changes.
2. Navigate through the language selections:
• To step through the language selections, press the Reset button for less than 0.5
second.
• To go back to the previous language selection, press the Reset button for more than
0.5 second but less than 5 seconds.
3. When the correct language is displayed, release the Reset button.
Troubleshoot the TV Display
This section describes how you can resolve problems with the TV display.
The Color on the Laptop Looks Different Than on the TV
Sometimes colors on the TV screen and the laptop might be a slightly different. To match the
colors, change the TV settings until the screens are the same. (See your TV manual for color
adjustment help.)
To Next Page
Loading...
Need help?
General