USB Port
88
Trek N300 Travel Router and Range Extender PR2000
Once the connection is established, the status changes to Manually connected by xxx.
7. Click the Disconnect button at any time to release the connection.
The status then changes to Available.
For each computer, after you click the Connect and Disconnect buttons once, the utility
automatically handles the printing queue. The status of the printer displays as Available on all
the computers. Here are the rules of operation:
• When the status is
Available, you can use the USB printer.
• When the status is Manually connected by xxx, only the xxx computer can use the printer
.
Other network devices must wait until the xxx computer has released the connection, or
until the connection times out (the default time-out value is 30 seconds).
To Next Page
Loading...
Need help?
General
