USB Port
89
Trek N300 Travel Router and Range Extender PR2000
• You can set the value for the default time-out time from the Control Center -
Configuration screen
.
• The USB Control Center utility must be running for the computer to print to the USB
printer attached to the T
rek. If you exit the utility, printing does not work.
• Some firewall software, such as Comodo, blocks the ReadySHARE Print utility from
accessing the USB printer
. If you do not see the printer in the utility, you can disable
the firewall temporarily to allow the utility to work.
8. If your printer supports scanning, make sure that the printer is in the Available state and click
the Network Scanner button.
This step activates the scanner window so that you can use the printer for scanning.
To Next Page
Loading...
Need help?
General
