Page 7 of 19
Features
The following list identifies the key features of the NETGEAR ProSafe FS726TP Smart Switch with PoE.
• Twenty-four 10/100 Mbps and two 10/100/1000 Mbps auto-sensing Ethernet switching ports
• Twelve ports that support Power over Ethernet (IEEE 802.3af compliant)
• Two SFP GBIC combo Gigabit Ethernet slots for optional fiber connectivity
• Automatic detection of SFP GBIC modules
• Reset Button.
• Factory Defaults Button.
• Administrative switch management including:
♦ IEEE 802.1Q Tag VLAN with up to 64 VIDs ranging in 2 to 4K
♦ Port-based VLAN with up to 26 groups, any one port can belong to different VLAN groups
♦ IEEE 802.1p QoS support, 4 priority queues per port
♦ IEEE 802.3ad Link Aggregation support
♦ Web-based management with embedded HTTP server provided
♦ Supports port-setting function which allows user to enable/disable each port, set speed, duplex mode and device follow control
♦ Support Auto-Discovery application program for discovering and managing the switches on the network
♦ Support flash upgrading, configuration backup/restore and factory reset
• Full compatibility with IEEE standards:
♦ IEEE 802.3i (10BASE-T)
♦ IEEE 802.3u (100BASE-TX)
♦ IEEE 802.3z/ab (1000BASE-X, 1000Base-T)
♦ IEEE 802.3af (Power over Ethernet)
♦ IEEE 802.3x (full-duplex flow control)
• Auto-sensing and auto-negotiating capabilities for all ports
• Auto Uplink™ on all ports to make the right connection
• Integrated address Look-Up Engine, supports 8K absolute MAC addresses
• Full- and half-duplex functions for all RJ-45 ports
• Store-and-Forward transmission to remove bad packets from the network
• Active flow control to minimize packet loss/frame drops:
♦ Half-duplex back-pressure control
♦ Full-duplex IEEE 802.3x pause frame flow control
• LED indicators for port status monitoring:
♦ Power LED to indicate power on/off status
♦ Link/Act LED to indicate link status and activity
♦ Dual-color Mode LED to indicate speed, activity for Gigabit ports
• Flexible installation:
♦ Standalone desktop installation
♦ 19-inch standard rack-mount
• Standard 1U case size
To Next Page