NETGEAR ProSafe GS748T Hardware Installation Guide

32
GS748T Gigabit Smart Switch
Static LAGs
Broadcast Storm Recovery
RMON 1,2,3,9
Static L2 Multicast Filtering
Voice VLAN
Protected Ports
DHCP Filtering
Cable Test
Syslog (RFC 3164)
Persistent log supported
Port Locking
Denial of Service Protection (control plane)
Denial of Service Protection (data plane)
TACACS+
RADIUS
EAPol Forwarding
BPDU Flooding
Auto VoIP
Auto Video
Auto DoS
ACL Wizard
Management Security
Smart Control Center Discovery
Static Routing
Boot code update
Password management
IPv6 management
Text-based config
Inventory Support (Customized)
Restore Defaults Push Button
Restore Defaults via Web

NETGEAR ProSafe GS748T Specifications

Interface

RJ-45 connectors	48
SFP GBIC module bays	4
Auto Uplink	Yes

Performance Specifications

Bandwidth	40 Gbps
Network latency	Less than 20 microseconds
Buffer memory	1, 632 KB

Power Supply

Power consumption	70 W maximum
Input voltage	100-240VAC
Frequency	50-60 Hz

Physical Specifications

Dimensions (H x W x D)	1.7 x 17.3 x 10.1 in
Weight	8.8 lbs
Weight (kg)	4.0 kg

Environmental Specifications

Operating temperature	0 to 40°C
Storage temperature	-20 to 70°C
Operating humidity	90% maximum relative humidity