NETGEAR ProSAFE JGS524PE Installation

Installation
48-Port Gigabit Ethernet
Smart Managed Plus Switch
GS750E
Step 2. Connect power.
Step 1. Connect the equipment. Step 3. Check the status.
Power LED Port LEDs (Ports 1–48) SPD LED
On 1000 Mbps link 1 Gps link
O 100 or 10 Mbps link 100 Mbps link
Activity (blinking) No link (o)
No link (o)
Server
Workstations
Switch
Package Contents
• NETGEAR 48-Port Gigabit Ethernet Smart Managed Plus Switch
• Rubber footpads for tabletop installation
• AC power cord (localized to country of sale)
• 19-inch rack-mount kit for rack installation
Switch
Installation guide
(this document)
Rubber feet
AC power cord
(localized to
region)

NETGEAR ProSAFE JGS524PE Specifications

General

Model	JGS524PE
Category	Switch
PoE Budget	190W
Switching Capacity	48 Gbps
VLAN Support	Yes
QoS	Yes
Form Factor	Rack-mountable
Forwarding Rate	35.7 Mpps
MAC Address Table Size	8K
PoE Standard	802.3af
Humidity	10% to 90% non-condensing
Power Supply	Internal
Ports	24
PoE Ports	12
Management	Web-based
Switch Type	Smart Managed
Operating Temperature	0 to 50°C
Storage Temperature	-20 to 70°C
Input Voltage	100-240V AC
Jumbo Frame Support	9, 216 bytes